Goto Home Show Profile Sevice Products League Support Installation Contact us Goto BBS
A-One Blinds Installation Instructions

Thank you for purchasing A-One Wood & Bamboo Blinds. Your blind has been custom made to your specifications and is one of the finest window treatments available. Before you install your blinds, please take a few moments to read these instructions. With careful installation and periodic cleaning, your blinds will provide you with many years of trouble free service.

For your and your family's safety, please read the Warning include in these instructions carefully. You will also find a warning tag attached to the lift cord. Please keep these installation instructions so that future owners of this product are aware of the potential dangers associated with children playing with blind cords.

warning



EMERGENCY FIRST AID FOR STRANGULATION

warning
  • Remove cord from child's neck
  • Call 911 or Emergency Center
  • Clear throat
  • Check breathing and heart beat
  • Begin CPR

Mounting Hardware

Mounting-Hardware

Included in package:
  1. Complete blinds.
  2. Two mounting bracket.
  3. One wand (If you select this control option).
  4. Several screws.
  5. One valance (If you choice outside mount option, two valance returns and two Valance Return Clips will be included).
  6. Several Valance Clips.
  7. Several Center Support Brackes (for sizes wider than 32").
  8. Two Hold Down Brackets (If you select this option).
  9. Installation instruction.
  10. Safety Cord-Stop.
Be sure you have all components.



Mounting-Hardware

Brackets should be placed at the width of blinds headrails+1/4" past each end. The bracketst does not necessarily need to touch the inside face of the window frame.



Mounting-Hardware

Align the top of the Center Support bracket with the top of the mounting bracket before installation. Install with the bigger flap of the Center Support Bracket on the top side and off ladder positions.



Mounting-Hardware

Push rail into brackets. Then press gate to close brackets and hook valance clip with valance attached onto the top of the headrail.



Mounting-Hardware

Always tilt blind horizontally before raising/lowering to extend the life of the blinds.

To lower blind: Move cord to left, pulling down gently until Cord Lock releases.
To raise blind: Pull cord downward until blind reaches desired height.
To lock cord: pull cord right and release.
Cord will lock automatically.



Mounting-Hardware

Hold down brackets Using two small screws, screw base of Hold Down Bracket to window facing or wall. Snap bracket pin ends into the hole of the bottom rail end caps.

NOTE: The use of Hold Down Brackets is recommended to fully utilize the safety feature of the Cord-Stops.

Can-Wood Industries Ltd.
106-11500 Bridgeport Richmond, BC, Canada, V6X 1T2
Tel:1-604-233-1963 Fax:1-604-304-8641 | Email US
| Home | Company | Products | Service | League | Promotion | Contact | BBS | Online Shop |
2003 - 2005 Copyright Can-Wood Industries Ltd. All Right Reserved.